Bought a new head unit?

Let’s learn bought a new head unit. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

New headunit and distortion?

i installed the same aftermarket unit ive had before and before it was never this distorted the sound seems to have some distortion. it was installed the same way the only thing i did different was used a different brand harness. can this really be a bad headunit i bought it brand new not refurbished from a authorized dealer? what things could cause it to not be to clean?

Answer:

what kind of car do you have? it may be possible that there isd a factory amplifer in your car that...

ccaps83 at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

Other solutions

I just bought a new Kenwood head unit - why doesn't it fit?

After connecting all the wires, the unit does not fit all the way in the dash. There is about 2 inches left before it clicks into place. I've tried moving some of the mess of ...show more

Answer:

make sure you have the correct installation kit.

2R3FORJPFBOTFG2OFQZJXIHATM at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

Recently bought 2007 rx8 with premium Bose system, but head unit replaced. Where can I buy original unit?

The currently installed head unit looks tacky, and I believe I would enjoy the original unit more and would find it easier to use. Where can I buy the original Mazda RX-8 with premium Bose head unit? Thanks

Answer:

Look in the salvage yards or on ebay.

sharpy at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

Help I have 2 kenwood subs with a 1000 watt kenwood amp, and head unit. I just bought another kenwood to hook?

help I have 2 kenwood subs with a 1000 watt kenwood amp, and head unit. I just bought another kenwood to hook up. would it be louder 2 buy1 more sub, or just hook the two amps to the 2 subs, which will be louder.

Answer:

You lost me a little bit. Did you get a new amp of new sub? Hooking up 2 amps would be a 3 db increase...

austin_a... at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

I bought a accoustic solutions head unit from argos i am getting feed back from my 6x9 when i press on the gas

can any help me to stop the feed back that i am getting? i am using a jbl amp & sub. the amp is powering the 6x9 at the back & 10"sub .the head unit is powering the front speakers .the car fiat punto . much thanks

Answer:

your feedback is from the alternator.first what kind of wiring are you using?if its whatever you could...

mic c at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

Bought a car cd player jvc head unit. help please?

do i need to buy new (larger) speakers, or will it be ok to connect it to the present speakers (in the doors) or do i need some more speakers? got a ford ka 1300. it it expensive to get this fitted? thank you. it is 2 x 50 watts.

Answer:

no you will be fine, my Mrs had a ka and i fitted a jvc head unit in it and it worked fine, in the end...

heavymet... at Yahoo! Answers Mark as irrelevant Marked as irrelevant Undo

Just bought the alpine cda-105 CD receiver and kcu-440i usb iPod cable and when you plug your iPod in the head unit wont recognize it it doesn't do anything like display error messages it just doesn't?

Answer:

if youre plugging right into the usb jack it wont work. the radio doesnt have the required software...

wiki.answers.com Mark as irrelevant Marked as irrelevant Undo

How much will Pep Boys charge me to install a head unit bought at their store

Answer:

I'm not finding a listing of service charges for Pep Boys. Is there a certain location you'd like contact...

Anonymous at ChaCha Mark as irrelevant Marked as irrelevant Undo

If u buy a jvc head unit for your car and it fries upon installation, will warantee cover it? I bought it from onlinecarstereo.com?

Answer:

Onlinecarstereo.com has a 1 year warranty, contact them for details 1.888.615.5663.

Jessica F. at ChaCha Mark as irrelevant Marked as irrelevant Undo

I have a 2000 VW Jetta with the monsoon stereo. I bought the original slave CD player to add to the system. I made all of the connections but the CD player only works/has power when its casing is touching the casing of the head unit. Did I miss something?

Answer:

I think you're missing a ground connection for the slave CD player. Try running a wire from the casing...

crt5018 at Answerbag.com Mark as irrelevant Marked as irrelevant Undo

Related Q & A:

Does anyone know of a good Perl unit test generator?Best solution by Stack Overflow
What is the best HD Radio Head Unit?Best solution by Yahoo! Answers
What Amp and head unit paired with this sub?Best solution by Yahoo! Answers
Why is my stereo head unit turning off?Best solution by Yahoo! Answers
Is my car stereo head unit fried?Best solution by ask.metafilter.com

Just Added Q & A:

How many active mobile subscribers are there in China?Best solution by Quora
How to find the right vacation?Best solution by bookit.com
How To Make Your Own Primer?Best solution by thekrazycouponlady.com
How do you get the domain & range?Best solution by ChaCha
How do you open pop up blockers?Best solution by Yahoo! Answers

For every problem there is a solution! Proved by Solucija.

Got an issue and looking for advice?
Ask Solucija to search every corner of the Web for help.
Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.